SKU 2792 For technical questions, please call 1-800-444-3353. Page 7
MAINTENANCE
Keep your ATV Lift dry, protecting it 1.
from wet, corrosive environments.
Periodically lubricate the Lift’s moving 2.
parts.
Periodically check that all of the Lift’s 3.
hardware is securely fastened.
If the Lift does not work to full capac-
ity, you may have air in the hydraulic
system.
Bleeding and lling the Jack with
hydraulic oil.
Place the Lift on a at, level, solid 1.
surface.
If just lling the Jack, open the 2. Oil
Filler Plug (10a) and check the oil.
Fill to the top of the Oil Reservoir
(9a) with a high quality hydraulic oil if
necessary.
If bleeding, with the 3. Oil Filler Plug
(10a) removed, use one foot to step
on and keep the Release Pedal (18)
down, while you quickly pump the
Foot Pedal (17) ten times. This will
bring all the air out of the system.
Continue pumping until no more air
bubbles appear. Fill to the top of the
Oil Reservoir (9a) with a high quality
hydraulic oil if necessary. Repeat if
necessary.
Replace the 4. Oil Filler Plug (10a).
Test the Jack. Make sure it is func-5.
tioning properly before attempting
to lift another load. Pump the Foot
Pedal (17) up and down several
times, and test the Release Pedal
(18) to make sure it is working prop-
erly; if not, repeat the above process.
If the lift continues to function improp-
erly, have a qualied service techni-
cian check the product.
To Next Page
Loading...
