To Next PageTo Next Page
Need help?Do you have a question about the Central Hydraulics 1647 and is the answer not in the manual?
General| Brand | Central Hydraulics |
|---|---|
| Model | 1647 |
| Category | Lifting Systems |
| Language | English |
Details on maximum capacity, boom length, and chain specifications.
Information on the unit's weight and the type of latch used for the chain.
Rules for workplace cleanliness, child safety, and avoiding operation under impairment.
Precautions for vehicle stability, moving parts, and personal balance during operation.
Recommendations for eye protection, attire, and safe storage of idle equipment.
Adherence to the 1000 lb limit and using only identical replacement parts.
Instructions for checking parts upon unpacking and contacting for missing items.
Information on extension settings, weight limits, and greasing the unit.
Slide the Post onto the Base and attach using the Large Lock Pin.
Connect the Pump Unit to the lower Post bracket using the Medium Pin.
Attach the Boom and Extendible Boom to the Post assembly using pins.
Connect the Hook and Chain, and attach the Pump Handle.
Securely bolt the Base to the truck frame using Steel Angles as backing plates.
Adjust the Post and position the Hook and Chain over the article to be lifted.
Operate the pump handle to lift the load and swivel the base to move it.
Turn the Pump Release Valve counterclockwise to slowly lower the object.
