Central Hydraulics 37555 - Specific Use and Handling Safety; Setup Procedures; Unpacking and Component Check; Base and Post Assembly

Page 3SKU 37555
15. When servicing, use only identical replacement parts. Use of any other parts will
void the warranty. Only use accessories intended for use with this tool. Approved
accessories are available from Harbor Freight Tools.
16. Do not wear loose clothing or jewelry when operating. Wear protective hair covering
to protect long hair. Uncovered long hair can get caught in moving parts.
17. Always set pickup truck parking brake and block tires when using lift. Vehicles with
automatic transmissions should be left in “park.” Manual transmissions should be left
in gear. Never attempt to lift something while the vehicle is moving.
18. Do not operate tool if under the inuence of alcohol or drugs. Read warning
labelsonprescriptionstodetermineifyourjudgmentorreexesareimpairedwhile
taking drugs. If there is any doubt, do not operate the tool.
UNPACKING
Open box and examine components. Look for any loose parts in the packing material
beforediscarding.Ifanyarefound,tryandndthepartonthepartslistorontheexploded
view of the lift, and reinstall the part. If any part of the machine is missing or broken, please
call Harbor Freight Tools at the number on the front cover as soon as possible.
ASSEMBLY
While assembling the truck lift, refer to the Assembly Parts Illustration on the last page.
1. PlacetheBase(01)inthelocationonthetruckbedwhereitistobesecured.This
atlocationmustbeabletosupporttheliftwitha1000lb.load.(Onmosttrucks,a
desirable position is just behind the wheel so that the boom may be stored over the
wheelwell.)
2. Usingapencil,markthroughthemountingholesintheliftbase(01)tomarkdrill
holes.
3. Using a power drill and appropriate drill bit size, drill holes through truck bed.
4. Placethebolts(22)throughtheBaseandintothetruckbedholes.
5. PlaceeachAngleSteel(11)plateunderthetruckbed,overtheprotrudingbolts(22),
andsecurewiththewashers(23),springwashers(24),andnallythenuts(25),as
shownintheAssemblyPartsIllustration.Tightennuts(25)securely.
6. PlacethePost(02)upperliftassemblyontotheBase(01).InsertLockPin(20).
Warning: The Lift has four extension settings for the Extendible Boom. Each setting has a
weight limit that is clearly marked on the Boom. Do not exceed these weight limits as
it may cause damage to the Pick Up Truck Lift and/or cause bodily injury.