Central Machinery 1 x 30 inches 2485 User Manual

BELT SANDER - 1 X 30 INCHES
Model 02485
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright
©
2002, 2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form without
the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual Revised 01/07

Central Machinery 1 x 30 inches 2485 Specifications

General

Type	Belt Sander
Belt Size	1 x 30 inches
Model Number	2485
Motor Power	1/3 HP
Voltage	120V
Motor	120V, 60 Hz

Summary

Safety Guidelines

General Safety Rules

Covers work area, electrical, personal safety, tool use, care, service, and specific precautions.

Grounding and Extension Cords

Details grounding for tools and guidelines for selecting and using extension cords safely.

Assembly and Operation

Assembly Instructions

Step-by-step guide for assembling the table and other components to the main body of the belt sander.

Operating the Belt Sander

Procedures for sanding wood, including setup, safety checks, and the actual sanding process.

Adjustments and Tracking

Guides for adjusting table angle, leveling, belt tracking, and belt support for optimal performance.

Product Information

Specifications

Technical specifications of the belt sander, including power, dimensions, and weight.

Symbology and Unpacking

Explanation of symbols used in the manual and instructions for unpacking the tool.

Maintenance and Parts

Procedures for tool maintenance, including cleaning, storage, and replacement of worn parts.

Diagrams and Warranty

Assembly and wiring diagrams, plus warranty information for the product.