Central Machinery 34951 User Manual

BELT/DISC
SANDER
34951
SET UP AND OPERATING INSTRUCTIONS
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
1996 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Cover Revised 09g
Brought To You By Augusta Flint

Central Machinery 34951 Specifications

General

Brand	Central Machinery
Model	34951
Category	Sander
Language	English

Summary

Important Safety Information

Safety Alert Symbol and Hazard Definitions

Explains safety alert symbol and definitions for DANGER, WARNING, CAUTION, and NOTICE.

General Tool Safety Warnings

Keep Guards in Place

Remove Adjusting Keys and Wrenches

Extension Cord Safety

Use appropriate gauge extension cords based on load and length.

Grounding Instructions

110-120 V~ Grounded Tools

Details on using tools with three-prong plugs and proper grounding.

110-120 V~ Double Insulated Tools

Guidelines for using double-insulated tools with two-prong plugs.

Sander Safety Warnings

Workpiece Support and Handling

Belt and Disc Sanding Technique

Guard Integrity

Never operate the tool with any guard disabled, damaged, or removed.