To Next PageTo Next Page
Need help?Do you have a question about the Central Machinery 69033 and is the answer not in the manual?
General| Brand | Central Machinery |
|---|---|
| Model | 69033 |
| Category | Sander |
| Language | English |
Defines the safety alert symbol used to indicate potential personal injury hazards.
Defines DANGER, WARNING, CAUTION, and NOTICE labels for hazard severity and potential outcomes.
Provides essential safety guidelines for tool operation, maintenance, and work area setup.
Details safe grounding procedures for three-prong plug tools to prevent electric shock.
Illustrates the correct grounding outlet and plug for safe connection.
Emphasizes reading the manual and wearing eye protection for safe operation.
Guides on supporting workpieces and maintaining 1/16 inch clearance for safe sanding.
Advises on avoiding kickback by sanding with directional arrows and correct disc rotation.
Explains the function and adjustment of the backstop and worktable for safe operation.
Stresses the importance of keeping guards in place and functional for safety.
Provides advice to reduce physical injury from prolonged tool vibration exposure.
Advises seeking medical advice and taking precautions for vibration-related symptoms.
Instructions for mounting the sander to a work table, including preparation and securing steps.
Step-by-step guide for removing the old belt and installing a new one.
Procedure for adjusting the belt's position to ensure it runs centered on the wheels.
Guidance on attaching and adjusting the belt table for 90° and bevel sanding.
Instructions for assembling, removing, and adjusting the disc table for proper alignment.
Steps for removing and reinstalling the dust chute.
Procedure for removing an old sanding disc and installing a new one.
Safety precautions before assembling or adjusting the tool.
Guidelines for preparing a clean, well-lit work area and securing workpieces.
Steps for operating the sander, including setup checks, power connection, and sanding technique.
Tips for using the sanding disc safely and effectively, including direction and pressure.
Advice for sanding different surfaces and sharpening tools using the belt.
Procedures for inspecting, cleaning, and maintaining the tool for safe operation.
Identifies common problems and their likely solutions for tool operation and performance.
A comprehensive list of all parts with their corresponding part numbers and quantities.
