Central Machinery 32208 User Manual

14” WOOD BANDSAW
WITH DUST CHUTE
32208/
32206
SET UP AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed Exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2001 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual revised 11h

Central Machinery 32208 Specifications

General

Brand	Central Machinery
Model	32208
Category	Saw
Language	English

Summary

SET UP AND OPERATING INSTRUCTIONS

IMPORTANT SAFETY INFORMATION

General Tool Safety Warnings

Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.

Bandsaw Safety Warnings

Vibration Safety

GROUNDING INSTRUCTIONS

Grounded Tools: Tools with Three Prong Plugs

Explains safe grounding procedures for tools with three-prong plugs to prevent electric shock.

ASSEMBLY

PHASE 1: Stand Assembly

Step-by-step instructions for assembling the stand components of the bandsaw.

PHASE 2: Foot Assembly

PHASE 3: Bandsaw Body to Stand Assembly

PHASE 4: Motor to Stand Assembly

PHASE 5: Table Assembly

PHASE 6: Pulley Cover Assembly and Belt Installation

Side Panel Installation

PHASE 7: Upper Guide and Post Cover Assembly

PHASE 8: Saw Blade Installation

Instructions for installing the bandsaw blade onto the pulleys and guides.

Saw Blade Tensioning and Tracking

Adjusting blade tension and ensuring the blade tracks correctly on the pulleys.

Guide and Bearing Adjustment

Fine-tuning blade guides and bearings for optimal cutting performance and alignment.

SETTINGS

Table Angle Adjustment

Blade Guide Adjustment

Blade Speed Adjustment - for SKU 32208 only

OPERATION

MAINTENANCE AND SERVICING

Cleaning, Maintenance, and Lubrication

Troubleshooting

Common problems and solutions for motor, blade movement, cutting, and tracking issues.