Central Machinery 90597 User Manual

COMPOUND MITER SACOMPOUND MITER SA
COMPOUND MITER SACOMPOUND MITER SA
COMPOUND MITER SA
WW
WW
W
10 INCH10 INCH
10 INCH10 INCH
10 INCH
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 MISSION OAKS BLVD., CAMARILLO, CA 93011
VISIT OUR WEB SITE AT HTTP://WWW.HARBORFREIGHT.COM
Copyright © 2003 by Harbor Freight Tools
®
. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
90597

Central Machinery 90597 Specifications

General

Model	90597
Category	Saw
Type	Band Saw
Motor	1/3 HP
Voltage	120 V
Table Tilt	0 - 45 degrees
Throat Depth	9 in.
Cutting Height	3-5/8 inch

Summary

GENERAL SAFETY RULES

Electrical Safety Precautions

Rules for safe use of electrical power tools, including grounding and cord care.

Personal Safety Guidelines

Advice on attire, alertness, and avoiding distractions for personal safety during operation.

Tool Use and Care

SPECIFIC SAFETY RULES FOR THIS PRODUCT

Product-Specific Safety

Detailed safety instructions and warnings specific to the operation of this miter saw.

GROUNDING AND ELECTRICAL CONNECTIONS

Grounded Tools (Three Prong)

Double Insulated Tools (Two Prong)

ASSEMBLY INSTRUCTIONS

Bench Mounting Procedures

Installing a New Saw Blade

Step-by-step guide for safely removing and installing saw blades.

OPERATING INSTRUCTIONS

Basic Saw Operation

Fundamental steps for powering on, operating, and shutting down the miter saw.

Making Crosscuts

Body and Hand Position for Safety

Workpiece Clamping Techniques

Performing Special Cuts

INSPECTION, MAINTENANCE, AND CLEANING

REPLACING MOTOR CARBON BRUSHES