Central Machinery 45804 User Manual

10” BENCH TABLE SAW - 2 HP
Model 45804
ASSEMBLY AND OPERATING INFORMATION
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Copyright
©
2004 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form without
the express written consent of Harbor Freight Tools.
For technical questions please call 1-800-444-3353.
®
Brought to You by Augusta Flint

Central Machinery 45804 Specifications

General

Blade Diameter	10 inches
Maximum Speed	5000 RPM
Amperage	15 Amps
Voltage	120 Volts
Arbor Size	5/8 inch

Summary

Assembly and Operating Information

Critical Safety Warnings

Essential instruction to read all warnings and instructions before use.

Product Specifications and Safety

Product Specifications

Details the technical specifications of the table saw.

General Safety Rules

Fundamental safety rules to prevent injury and accidents.

Electrical and Personal Safety

Precautions for safe electrical connections and operator safety.

Tool Use, Maintenance, and Grounding

Tool Use and Care

Guidelines for effective operation and upkeep of the saw.

Service, Grounding, and Extension Cords

Information on servicing, grounding, and extension cord selection.

Specific Safety Rules for Operation

Detailed safety instructions for saw operation.

Assembly Instructions

Installing Bottom Plate and Saw Blade

Steps for installing the bottom plate and saw blade.

Attaching Guard and Fence Assemblies

Instructions for attaching the blade guard and fence.

Operating Procedures

Saw Blade Adjustments

How to adjust the saw blade height and cutting angle.

Adjusting Cut Width and Hand Placement

Setting cut width and safe hand positioning during cutting.

Overload Protection and Cleaning

Managing overload protection and cleaning the saw.

Parts Lists and Diagrams

Parts List A (1-95)

Component list for parts 1 through 95.

Parts List B (96-196)

Component list for parts 96 through 196.

Assembly Diagrams Reference

Visual guides for assembling the saw components.

Mounting, Accessories, and Warranty

Mounting Instructions

Steps for securely mounting the table saw.

Build a Push Block

Instructions for constructing a safety push block.

Product Limited Warranty

Details of the product's warranty coverage and terms.