Central Machinery 97099 User Manual

METAL CUTTING BANDSAW
7” X 12”
Model 97009
SET UP AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.

Central Machinery 97099 Specifications

General

Brand	Central Machinery
Model	97099
Category	Saw
Language	English

Summary

Important Safety Information

General Safety Rules

Electrical Safety

Crucial precautions for preventing electrical hazards and ensuring safe power usage.

Personal Safety

Specific Safety Rules

Grounding and Electrical

Extension Cords

Guidelines for selecting and using appropriate extension cords for the tool.

Setup and Assembly

Operating Procedures

Component Adjustments

Instructions for adjusting the stop block, blade speed, guides, tracking, tension, and feed rate.

Vertical Cutting Operation

Detailed instructions for operating the bandsaw in its vertical configuration.

Horizontal Cutting Operation

Detailed instructions for operating the bandsaw in its horizontal configuration.

Maintenance and Troubleshooting

Troubleshooting Common Issues

Solutions for common problems like blade breakage, dulling, and crooked cuts.