Page 6 For technical questions, please call 1-800-444-3353. SKU 46149
Figure E
11
6. Open the Ball Valve Lever (4) by
turning it vertically; oil will begin to
ow.
Figure F
Oil Level
Tube (8)
Emptying
Cap (9)
7. Oil should be removed when it is
70-80° or personal injury or property
damage may result. The Oil Level
Tube (See Figure F) will show you
how much oil is in the tank. Be sure
to keep the Probe near the bottom of
the sump.
EMPTYING OIL EXTRACTION
TANK
First close Ball Valve Lever (4) 1.
(Horizontally). Remove Probe from
vehicle.
Detach and close off Hose by putting 2.
on attached Cap. Disconnect Air
Compressor.
Remove Emptying Cap (9) and 3.
manually drain oil into an oil recycling
container.
Properly dispose of used oil. Contact 4.
local Hazardous Waste Disposal
Authorities for proper oil disposable
guidelines.
To Next Page
Loading...