Central Pneumatic 47016 67181 User Manual

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
NOTICE
CLEAN IMMEDIATELY
Clean the Spray Gun
IMMEDIATELY after use.
Delayed or inadequate cleaning will
permanently clog the Spray Gun.
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2002 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15c

Central Pneumatic 47016 67181 Specifications

General

Brand	Central Pneumatic
Model	47016 67181
Category	Paint Sprayer
Language	English

Summary

SAFETY

WARNING SYMBOLS AND DEFINITIONS

Defines warning symbols and their meanings for hazard identification.

IMPORTANT SAFETY INSTRUCTIONS

Provides critical safety guidelines for operating the tool to prevent hazards.

Personal Safety

Air Source

Specifies safe air source connection and usage requirements for the tool.

Specific Safety Instructions

SETUP

Initial Set Up

Air Supply Setup

Details how to connect and configure the air supply system for the tool.

OPERATION

Operating Instructions

Provides instructions on how to operate the spray gun safely and effectively.

Spray Gun Setup Adjustment

Paint Preparation and Filling

Pattern and Fluid Adjustment

Spraying Technique

Covers essential techniques for achieving good spray results.

User-Maintenance Instructions

Troubleshooting

Diagnoses and solves common spraying problems and pattern issues.

MAINTENANCE

Cleaning

Instructions on how to clean the spray gun after use.