Central Pneumatic 47016 User Manual

Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
ITEMS 47016 67181
20 oz. high volume, low pressure
gravity feed spray gun
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2002 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Owner’s Manual & Safety Instructions
REV 12c
NOTICE
CLEAN IMMEDIATELY
Clean the Spray Gun
IMMEDIATELY after use.
Delayed or inadequate cleaning will
permanently clog the Spray Gun.

Central Pneumatic 47016 Specifications

General

Average Air Consumption at 40 PSI	6 CFM
Nozzle Size	1.4 mm
Cup capacity	20 oz.
Maximum Pressure	90 PSI
Air inlet	1/4 inch NPT
Type	HVLP
Air Consumption	6 CFM @ 40 PSI

Summary

Safety Warnings and Definitions

Warning Symbols and Definitions

Important Safety Instructions

Provides critical guidance on preventing fire, electric shock, and personal injury.

Personal Safety and Tool Handling

Personal Safety Precautions

Outlines user attentiveness, proper attire, and safety equipment for safe operation.

Air Source Safety

Specific Safety Instructions

Safe Spraying Practices

Covers rules for directing spray, air pressure, heat sources, and handling flammable materials.

Chemical Handling and Warnings

Spraying Technique

Proper Spraying Technique

Details correct gun angle, distance, speed, and trigger control for a smooth finish.

Post-Spraying Procedures

Maintenance and Troubleshooting

User-Maintenance Instructions

Guidelines for inspection, cleaning, solvent selection, and proper disposal of used solvents.

General Troubleshooting Chart

Lists common problems like sputtering, no spray, overspray, and leakage with possible causes and solutions.

Spray Pattern Diagnosis

Warranty Information

Limited 90 Day Warranty