Central Pneumatic 95793 User Manual

Blast Gun With Gravity Feed
Item 95793
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
When unpacking, make sure that the product is intact and undamaged.
If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.
Visit our website at: http://www.harborfreight.com
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
Manual Revised 11i

Central Pneumatic 95793 Specifications

General

Nozzle Size	1.4 mm
Cup Capacity	20 oz
Tip Size	1.4 mm
Spray Pattern	Adjustable
Weight	2.2 lbs
Power Source	Air
Type	HVLP (High Volume Low Pressure) Paint Sprayer

Summary

IMPORTANT SAFETY INSTRUCTIONS

Work Area

Safety precautions for the work environment.

Personal Safety

Guidelines for operator safety and protective measures.

Tool Use and Care

Service

Procedures for qualified personnel to service the tool.

Air Source

Requirements and warnings for connecting the air source.

Silicosis and Aluminum Oxide Warnings

NIOSH Recommendations

Measures to reduce crystalline silica exposure and prevent silicosis.

Functional Description

Specifications

Air Supply Setup

Accidental Operation Warning

Critical warning about preventing accidental tool operation.

Operating Instructions

Work Piece and Work Area Set Up

Steps to prepare the workpiece and work area.

General Operating Instructions

Step-by-step guide for using the blast gun.

User-Maintenance Instructions

Cleaning and Maintenance

Procedures for cleaning and maintaining the tool after use.

Troubleshooting

Parts List

Assembly Diagram

90 Day Warranty