PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this instruction sheet for the safety warnings and precautions, assembly, operating, inspection, maintenance and
cleaning procedures, parts list and assembly diagram. Keep your invoice with this instruction sheet. Write the invoice number on the
front cover. Keep this instruction sheet and invoice in a safe and dry place for future reference.
UNPACKING
When unpacking, check to make sure that the product is intact and undamaged. If any parts are missing or broken, please call
Harbor Freight Tools at the number shown on the front of this instruction sheet as soon as possible.
GRAVITY FEED SPOT BLASTER GUN
Model 95793
ASSEMBLY AND OPERATING INSTRUCTIONS
Maximum Air Pressure 90 PSI
Air Consumption 7 CFM
Air Inlet Size ¼”-18 NPT
Hopper Capacity 20 Ounces
Dimensions 11” H x 3” W x 10” L
Unit Weight 1.8 Pounds
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product. Failure
to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
To Next Page
Need help?
General
