Central Pneumatic PAINT SPRAY GUN 30224 User Manual

ASSEMBLY AND OPERATING
INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright
©
1997, 2005 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
Manual Updated 09/05
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Due to continuing improvements, actual product may differ slightly from the product described herein.
PAINT SPRAY GUN
30224

Central Pneumatic PAINT SPRAY GUN 30224 Specifications

General

Nozzle Size	1.4 mm
Air Consumption	4-6 CFM
Cup Capacity	20 oz
Type	HVLP
Fluid Tip Size	1.4 mm
Material	Aluminum
Air Inlet Size	1/4 in.

Summary

Specifications

Safety Warnings and Precautions

Air Connection

Control Layout

A Comparison: Conventional versus HVLP Spray Guns

Preparation

General Preparation Tips

Essential steps for preparing materials and the spray gun for use.

Fan Direction and Pattern Adjustment

Fan Direction

Instructions on how to orient the spray fan from horizontal to vertical.

Pattern Adjustment

Guidance on adjusting spray pattern size and shape using control knobs.

Techniques

Maintenance

Solvent Selection and Usage

Proper solvent choices for cleaning, safety guidelines for flammable solvents, and usage.

Cleaning Procedures

Step-by-step instructions for cleaning the spray gun after each use.

Parts List

Assembly Diagram

Troubleshooting

Spray Pattern Diagnosis

Identifies common spray pattern issues and their solutions.

90 Day Warranty