SKU 65903 For technical questions, please call 1-800-444-3353. Page 11
Wait several minutes to allow the Air Compressor’s Motor (14) to cool.3.
Press the Overload Reset Button (42) to reset the electrical circuit breaker. If it 4.
does not reset, wait a few additional minutes and try again. Then, rotate the Power
Switch Lever (9) to its “ON” position to resume work. (See Figure E.)
To Turn Off The Air Compressor:
When nished using the Air Compressor, press down on its Power Switch Lever (9) 1.
to turn off the unit.
(See Figure E.)
Disconnect the Power Cord Plug (31) from its electrical outlet.2.
Turn on the pneumatic tool to expend all remaining compressed air from Air Com-3.
pressor, air hoses, and pneumatic tools.
Turn Pressure Adjustment Knob (6) 4. counterclockwise all the way to its “OFF” posi-
tion. (See Figure E.)
Turn Lever on Air Outlet Valve (4) backward to 5. closed position. (See Figure E.)
Disconnect air hose from Air Outlet Valve (4). 6. (See Figure E.)
Disconnect air hose from pneumatic tool. Keep air hose and pneumatic tool in a 7.
clean, dry location out of reach of children.
To Next Page
Loading...
