To Next PageTo Next Page
Need help?Do you have a question about the Centro 3900S and is the answer not in the manual?
Assemble wheels and attach side panels to the bottom shelf as per instructions.
Secure the front brace to side panels and attach pillars to the cart structure.
Mount top lid, burner box, and upper back panel to the cart frame using hardware.
Attach the right side shelf fascia and assemble the shelf to the cart body.
Attach the left side shelf fascia and assemble the shelf to the cart body.
Install the side burner valve and attach its control knob.
Position side burner, attach electrode wire, place grate, and install heat shield.
Assemble towel bar and attach the main door to the cart pillar.
Place flame tamers, cooking grates, warming rack, and grease tray into position.
Prepare the electronic ignitor by inserting a battery into its compartment.
Position propane tank and connect regulator coupling nut to the cylinder valve.
Attach the natural gas hose to the side burner valve as indicated.
General