Need help?Do you have a question about the Centsys D5-Evo and is the answer not in the manual?
Step-by-step guide for disengaging the D5-Evo gearbox for manual operation.
Step-by-step guide for re-engaging the D5-Evo gearbox after manual operation.
Procedure for disengaging the D10/D10 Turbo gearbox for manual gate movement.
How to latch the manual release handle for extended manual mode use.
General information on operating the gate and its basic functions.
Details on Standard, Reversing, Condominium, PLC, and Deadman modes for gate operation.
Configuration and override options for the automatic gate closing feature.
How to set up and use the partial gate opening for pedestrian access.
Enabling visitors to exit properties easily using inductive loops or beams.
Using safety beams for automatic closing when vehicles pass through.
Immobilizes the operator and deactivates inputs for property security.
Using Holiday Lockout for emergency gate stops or a dedicated pushbutton.
Ensures the gate closes fully against the end post for security.
Customizing open/closing speeds, ramp-up, ramp-down, and crawl distances.
Adjusting sensitivity to detect and respond to obstructions for safety.
Counter for gate collisions; system shutdown after exceeding a limit.
Details on closing and opening safety beams for obstruction detection.
Features like Ambush Alarm and Break-In Alarm to alert of unauthorized activity.
LED indicators on the intercom showing gate position and system status.
Configuring pillar lights to activate with gate operation for illumination and security.
Methods to control pillar lights using pushbuttons or remote controls.
Using pillar lights to warn of gate movement before and during operation.
Details on the receiver's compatibility with CENTSYS remote controls and function mapping.
Using the timer for automatic gate operation scheduling and time-barring.
Practical examples of using ChronoGuard for lighting, access control, and timed operations.
System shutdown mechanism to prevent battery discharge below critical voltage levels.
Details on the optional battery saver switch and solar power supply integration.
Information on the built-in lightning protection and the need for proper earthing.
General| Motor Voltage | 24V DC |
|---|---|
| Maximum Gate Weight | 500 kg |
| Battery Backup | Yes |
| Operating Temperature Range | -15°C to +50°C |
| Collision Sensing | Yes |
| Ingress Protection | IP54 |
| Input Voltage | 220V AC |
| Control Options | Remote, Keypad |
| Safety Features | Obstacle detection |
| Operating Speed | 18-22 m/min |
To Next Page
