Specifications
page 30
Can operate off a solar supply, consult Centurion Systems (Pty) Ltd for assistance
7Ah battery (can be upgraded for longer power failure autonomy)
Based on a push force of less than 50% of rated
o
Based on 25 C ambient temperature and unit not in direct sunlight
With brush replacement interval of two years
See D10 Turbo Maximum Operating Speed for Corresponding Gate Mass Table
Input voltage
Motor voltage
Motor power supply
Push force - rated
Gate speed (varies
with load)
Duty cyle - mains
present
Daily operations –
max
Gate mass - max
Onboard receiver
specification
240
300
400
500
600
700
800
900
1000
220-240V AC +/-10%,
50Hz
12V DC
Battery driven –
2A charger
17kgf
18 - 22m/min
50%
150
500kg
CENTSYS code-hopping
multichannel, 433MHz,
capacity - 500
transmitter buttons
50
40
36
32
29
27
25
24
23
220-240V AC +/-10%,
50Hz
24V DC
Battery Driven –
2.0A charger
30kgf
22 - 26m/min
45%
750
1000kg
CENTSYS code-hopping
multichannel, 433MHz,
capacity - 500
transmitter buttons
Technical data
Gate mass (kg)
D5 - Evo
Operator max. running speed (m/min)
D10
9. Specifications
Technical specifications
D10 Turbo maximum operating speed for
corresponding gate mass
220-240V AC +/-10%,
50Hz
24V DC
Battery Driven –
2.0A charger
15kgf
40 - 50m/min
25%
750
Varies with speed
CENTSYS code-hopping
multichannel, 433MHz,
capacity - 500
transmitter buttons
D10 Turbo
To Next Page
