Cleaning Intake
After repeated use, dirt and dust could accumulate around the intake of the T270 and
might reduce the working efficiency. To ensure the best efficiency and constant
airflow, the intake should be cleaned periodically.
CLEANING AND MAINTENANCE
Clean Side Brushes
1. After being used for a period of time, the brushes need to be replaced for working
more effectively.
2. Turn off the power, place bottom of the cleaner upward on a flat surface. Hold the
brush bristle and pull upward to remove the brush (see diagram below).
3. The side brushes can be rinsed and if they become crooked, you can soak them in
hot water to make them recover to the original shape. Install the brushes back after
cleaning.
Intake
HOLD
PULL UP!
EN-12
To Next Page