Need help?Do you have a question about the Centurion RDO-10A and is the answer not in the manual?
Verify door operates smoothly, is balanced, and meets force requirements.
Measure and ensure adequate space for mounting.
Choose left/right installation and configure dip switch.
Fit opener to door axle and secure mounting bracket.
Attach door curtain to drum wheel using self-drilling screws.
Securely fix the weight bar to the door rail.
Affix the warning label in a prominent position.
Connect the opener to a properly earthed power outlet.
Learn how to manually engage and disengage the opener from the door.
Program and remove remote transmitter buttons for various functions.
Adjust the open direction slow stopping point based on door height.
Set the open and close limit positions for the door.
Configure and test safety reverse/stop for obstruction detection.
Configure the automatic closing feature for the garage door.
Understand the function and control of the courtesy light.
Set various operational modes and features using dip switches.
Enable monitoring of door balance and alerts for imbalance.
Interpret the status indications provided by the opener's LED.
Connect and configure safety beams for obstruction detection.
Adjust the opener's running speed for different door types.
Details on connecting external accessories like receivers and switches.
Enable security feature to disable push button functionality.
General| Horsepower | 1/2 HP |
|---|---|
| Security | Rolling code technology |
| Operating Temperature | -20°C to 50°C |
| Motor Type | DC |
| Battery Backup | Yes |
| Remote Controls | 2 |
To Next Page
