Century 2000 - LOCALIZER BACK COURSE PROCEDURES; LOCALIZER BACK COURSE STEPS

Localizer Back Course
STE
P
HSI MODE REMARKS
1 HDG/NAV
ALT or
ATT
The localizer back course
approach begins with a
transition from the enroute
structure to an intercept with
the back course outbound.
The inbound front course is set
on the course arrow. Press
the HDG and NAV switchs
simultaneously. The system
will follow the heading bug until
an on course turn is made.
2 NAV
ALT or
ATT
As the outbound course is
tracked, select the outbound
procedure turn heading with
the heading bug. Altitude
should be controlled as
appropriate for the procedure.
3 HDG
ALT or
ATT
When the outbound procedure
turn is desired, press the HDG
switch and fly outbound for
sufficient time to permit re-
interception.
4 HDG
ALT or
ATT
Lead the aircraft through the
procedure turn by moving the
heading bug in the direction of
the turn.
Localizer Back Course
50
51