Localizer Back Course
STE
P
HSI MODE REMARKS
5 HDG
ALT or
ATT
As the aircraft continues to
turn, set the heading bug to the
inbound procedure turn
heading.
6 HDG/REV
ALT or
ATT
Press the HDG and REV
switches simultaneously. The
HDG and REV lamps should
illuminate to indicate the
system is in a dual mode. The
system will follow the heading
bug until the on course turn is
initiated then the HDG lamp
will extinguish.
7 REV
ALT or
ATT
After the on course turn is
completed, the system will
enter the “soft track” mode to
limit radio authority and bank
angles and to correct for
crosswind.
8 REV
ATT
Control altitude and airspeed
as appropriate for the
approach.
Localizer Back Course
STE
P
HSI MODE REMARKS
9 REV
ATT
Once the aircraft has reached
minimums, disconnect the
autopilot. If a missed
approach is required,
disconnect the autopilot and
establish desired climb attitude
and airspeed. When
appropriate press HDG and
ATT or ALT and engage
autopilot.
52 53
To Next Page
Loading...
