Ceridian Dayforce Tuff Clock - Relay Module Pinout Diagrams; Relay Module Usage Warning

DF Tuff
Page 22 of 31
Pin 1, DIGITAL INPUT A
Pin 2, DIGITAL INPUT A
Pin 3, DIGITAL INPUT B
Pin 4, DIGITAL INPUT B
Pin 5, RELAY OUTPUT A
Pin 6, RELAY OUTPUT A
Pin 7, RELAY OUTPUT B
Pin 8, RELAY OUTPUT B
Figure 8: Relay Module Pinouts, viewed looking at clock connector
Figure 9: Field-wireable connector pinouts
The Relay Module is intended for small-signal, low-voltage interface
only. Do not connect to line-voltages.