DS Multi-8
WWW.CERTINA.COM
328_EN / 11.14
3/7
T1 & T2 – 1st AND 2nd TIME ZONE
ADD/SPLIT CHRONOGRAPH
TIME SWAP
To set T1 or T2, the digital display must show T1 or T2 accordingly. T2 can only be adjusted
by an hour and 15 minutes.
A chronograph enabling times to be added and split times measured. The ADD and SPLIT
functions can be combined. Up to 20 times can be stored.
➀
can be repeated as often as the times
(TOT = addition, SPL = split time) are meas-
ured.
Total time
display
(TOTAL)
To set a time difference between T1 and T2 using the date change calculation, the date
(+/- 1 day) can be changed. If the user returns to the T1 display using the hands, the date
is no longer required (difference stored).
Press and hold
for 2 secs
Press
once
Press
once
Press
once
Press
once
Press
once
Press
once
Press
once
Press
once
Press
once
Press
once
Press
once
Press
once
Press
once
Press
once
Press and
hold for
2 secs
Press
once
Press
once
Press
once
Hours,
minutes
Start
Start
Stop
Display split
time
After
1 second
After
1 second
or
Restart (elapsed
time retained)
Stop
➀
and
➁
can be repeated several times.
➁
and
➂
can
be repeated several
times.
T1 on the hands Change date. T2 on the hands
With seconds reset to zero.
Without seconds reset to zero.
ADD
SPLIT
MEMORY (read the stored times after timing) MEMORY (clear)
➀
➀
➀
➀ ➁
➁
➁ ➂ ➃
➀ ➁ ➂
➂
➁
+
–
OK
+
–
OK
OK
OK
To Next Page
Loading...
