Need help?Do you have a question about the CERTUSS Junior 250 - 400 and is the answer not in the manual?
Covers applicable regulations and standards for installation and operation.
Specifies qualifications and responsibilities for personnel operating the unit.
Details the responsibilities of the steam generator operator.
Provides safety guidelines for working with electrical and electronic components.
Outlines safety precautions to be taken during maintenance activities.
Explains the basic operation and startup sequence of the steam generator.
Describes the functions and options of the Thermotimat control system.
Details operation without constant supervision for up to 24 hours.
Details operation without constant supervision for up to 72 hours.
Covers requirements and considerations for the initial installation of the steam generator.
Details the steps and checks required for the initial startup.
Procedure for manual startup and shutdown of the steam generator.
Step-by-step guide for initiating the startup process via the touchscreen.
Procedure for safely switching off the steam generator.
Instructions for activating and programming the Thermotimat system.
Alerts for upcoming periodic safety inspections.
Explains how fault shutdowns occur and how they are displayed.
Provides daily and periodic testing procedures for the steam plant.
Details how to test the low-water-level safety device.
Procedure for testing the steam temperature limiter function.
Procedure for testing the flue-gas temperature limiter.
Tests the safety valve and steam pressure limiter functions.
Details the procedure for testing the flame monitoring system.
Provides daily and periodic maintenance guidelines for the steam plant.
To Next Page
General
