Need help?Do you have a question about the CERTUSS Junior 150 - 200 and is the answer not in the manual?
Operations on the steam generator shall only be effected by authorised persons due to their training and qualification.
The steam generator must be used only in perfect condition to prevent danger.
Warning about the danger of life when contacting live wires or construction elements.
Guidelines for safe maintenance operations on electrical and gas equipment.
Explains the features and options of the Thermotimat control system for automated operation.
Describes the generator's capability for unsupervised operation for up to 24 hours.
Details requirements and considerations for unsupervised operation for up to 72 hours.
Provides guidelines for the correct installation of the steam generator and its accessories.
Details the steps and checks required for the initial commissioning of the steam generator.
Instructions for manual starting and stopping the steam generator by instructed personnel.
Guides on how to activate and program the Thermotimat system for automated operation.
Indicates increased water admission pressure, possibly due to specific operational issues.
Indicates overload condition when steam pressure drops below minimum during constant operation.
Explains how malfunctions cause the boiler control system to shut down and how to display fault causes.
Describes how to test the safety temperature limiters to ensure proper function.
Instructions for checking the safety valve and steam pressure limiter functions.
Describes the procedure for checking the flame monitoring system.
To Next Page
General
