To Next PageTo Next Page
Need help?Do you have a question about the CERUS Titan CI-007-P4 and is the answer not in the manual?
Offers essential guidelines for safely handling, mounting, and installing VFDs to ensure proper operation and prevent damage.
Illustrates fundamental power and control wiring configurations for P Series VFDs.
Describes the LCD keypad, its layout, and the functions of each key for VFD programming and operation.
Lists and describes parameters in the Setup group, covering application selection, motor data, and basic control settings.
Details parameters within the Drive group, focusing on command frequency, speed settings, and motor monitoring.
Explains parameters related to acceleration, deceleration, pre-heat, start modes, and protection features.
Covers parameters for fault history, jump frequencies, auto-tuning, and VFD protection settings.
Details parameters for configuring digital and analog inputs and outputs, including voltage and current scaling.
Explains parameters for application-specific functions like PID control, auxiliary motors, and torque boost.
Details the SET parameter group, covering application selection, motor data, input phase, and drive mode settings.
Explains parameters for controlling VFD output frequency, speed, current, voltage, and fault status.
Illustrates the wiring connections for PID control, including keypad, digital input, and analog feedback.
Lists VFD faults, their protective functions, and descriptions, aiding in diagnosing operational issues.
Provides solutions and troubleshooting steps for various VFD protective functions and potential causes.
Offers guidance on diagnosing and fixing common operational issues like motor start problems and speed control instability.
Provides a comprehensive list of VFD parameters accessible via Modbus-RTU communication with their addresses and data values.
Outlines the warranty periods for variable and constant torque applications and conditions for service.
General