CERUS Titan CI-015-P4 - User Manual

P Series
Fan & Pump Optimized
Variable Frequency Drive
0.5–40HP (200~230VAC) , 3Ø
0.5–700HP (380~480VAC), 3Ø
0.5-150HP (525~600VAC), 3Ø
Dual Rated for Constant & Variable Torque
Integrated PID Control
Application Based Commisioning
cerusind.com | 1.800.962.3787
Installation, Programming
Operation, & Maintenance
Manual
As with all electrical products, read manual thoroughly
before operating. Only qualied, expert personnel should
perform maintenance and installation. Contact the nearest
authorized service facility for examination, repair, or
adjustment. Do not disassemble or repair unit; death or
injury due to electrical shock or re hazard may result.
Product improvement is a continual process at Cerus
Industrial. Specications and manual data subject to
change. Consult factory for additional information.
CAUTION, SAFETY WARNING
I n t e l l i g e n t M o t o r C o n t r o l s
P Series Manual Fan & Pump Optimized Variable Frequency Drive
cerusind.com | 1.800.962.3787

Summary

P Series Installation, Programming Operation, & Maintenance Manual

CAUTION, SAFETY WARNING

Important safety warnings and precautions for operating electrical products.

SAFETY INSTRUCTIONS

PRECAUTIONS

Handling and installation

Guidelines for safely moving, installing, and handling VFD units.

Wiring

Instructions and precautions for connecting VFD power and control wiring.

Start-up

Procedures for safely powering up and testing the VFD after installation.

Operation

Operation

Key operational considerations, settings, and best practices for VFD usage.

Maintenance, inspection and parts replacement

Guidance on routine checks, cleaning, and component replacement for VFD longevity.

CHAPTER 3 - INSTALLATION AND WIRING

3.1 Installation precautions

Crucial guidelines for safely installing VFDs in appropriate environmental conditions.

3.2 Basic Wiring Diagrams

Visual representations of power and control wiring configurations for VFDs.

CHAPTER 4 - OPERATION

4.1 VFD Programming Keypad

Overview of the VFD's LCD keypad, controls, and display functions.

4.2 Control Modes

Explanation of different modes for controlling VFD start/stop and speed references.

4.3 Function Settings and Descriptions

Description of VFD parameters, including settings, functions, and default values.

4.4 Control Wiring Configurations

Examples of digital and analog control wiring setups for VFDs.

CHAPTER 5 - PARAMETER LIST

CHAPTER 6 - PARAMETER DESCRIPTION

CHAPTER 7 - PID CONTROL WIRING AND BLOCK DIAGRAM

7.1 VFD Wiring for PID Control

Wiring diagram and instructions for connecting VFDs for PID control applications.

7.2 PID Control Block Diagram

Block diagram illustrating the PID control loop and its parameters.

7.3 PID control Sleep mode with Sleep Pressure Boost function diagram

7.4 PID control with Pipe Broken function diagram

7.5 PID control with Pre-PID function diagram

CHAPTER 8 - TROUBLESHOOTING & MAINTENANCE

8.1 Fault Display

Information on VFD fault codes, protective functions, and their meanings.

8.2 Fault Remedy

Guidance on identifying causes and corrective actions for various VFD faults.

8.3 Troubleshooting

Common VFD operational issues, checking procedures, and fixing methods.

8.5 Maintenance

Recommendations for routine VFD inspections and maintenance procedures.

8.5.1 Precautions

8.5.2 Periodic Inspection

CHAPTER 10 - MODBUS-RTU COMMUNICATION

CERUS Titan CI-015-P4 Specifications