CERUS Titan CI-075-P4 - User Manual

P Series
Fan & Pump Optimized
Variable Frequency Drive
0.5–40HP (200~230VAC) , 3Ø
0.5–700HP (380~480VAC), 3Ø
0.5-150HP (525~600VAC), 3Ø
Dual Rated for Constant & Variable Torque
Integrated PID Control
Application Based Commisioning
cerusind.com | 1.800.962.3787
Installation, Programming
Operation, & Maintenance
Manual
As with all electrical products, read manual thoroughly
before operating. Only qualied, expert personnel should
perform maintenance and installation. Contact the nearest
authorized service facility for examination, repair, or
adjustment. Do not disassemble or repair unit; death or
injury due to electrical shock or re hazard may result.
Product improvement is a continual process at Cerus
Industrial. Specications and manual data subject to
change. Consult factory for additional information.
CAUTION, SAFETY WARNING
I n t e l l i g e n t M o t o r C o n t r o l s
P Series Manual Fan & Pump Optimized Variable Frequency Drive
cerusind.com | 1.800.962.3787

Summary

Safety Instructions and Precautions

General Safety Instructions

Instructions to prevent injury and property damage during installation and operation of VFD.

Specific Warnings

Specific warnings related to operation, wiring, and maintenance of the VFD.

Specific Cautions

Specific cautions related to installation, operation, and handling of the VFD.

Handling and Installation Precautions

Precautions for physical handling and installation of the VFD unit.

Wiring Guidelines

Guidelines and precautions for wiring the VFD correctly and safely.

Start-up Procedures

Procedures and precautions for initial power-up and testing of the VFD.

Installation and Wiring Guide

Installation Precautions

Key precautions to follow during the installation process of the VFD.

Power Wiring Diagrams

Diagrams illustrating the correct power wiring for VFDs.

Control Inputs and Outputs Description

Detailed description of all VFD control inputs and outputs.

Power Wiring Recommendations

Essential recommendations for VFD power wiring to ensure safety and performance.

Grounding Procedures

Proper grounding procedures for VFDs to ensure electrical safety.

Wire Sizes and Terminal Lugs

Control Circuits Wiring Recommendations

NPN and PNP Digital Control Modes

VFD Operation and Parameter Programming

VFD Programming Keypad Overview

Programming VFD Parameters

VFD Control Modes

Function Settings and Descriptions

VFD and Motor Protection Parameters

Digital Control Configurations

VFD Parameter Groups

[SET] Setup Parameter Group

[DRV] Drive Parameter Group

[FG1] Function Group 1 Parameters

[FG2] Function Group 2 Parameters

[I;O] Inputs;Outputs Parameters

[APP] Application Parameters

Parameter Descriptions

Setup Group [SET] Parameters

Drive Group [DRV] Parameters

Function Group 1 [FG1] Parameters

Function Group 2 [FG2] Parameters

Input;Output Group [I;O] Parameters

Application Group [APP] Parameters

PID Control Settings

Parameters for PID control, including limits, feedback, and modes.

Troubleshooting and Maintenance

Fault Display and Diagnosis

Information on how VFD faults are displayed and saved for diagnosis.

Fault Remedies

A table listing common faults, their causes, and recommended remedies.

General Troubleshooting Procedures

General troubleshooting steps for common VFD operational issues.

VFD Power Component Checks

Routine Maintenance and Inspections

Routine maintenance procedures and guidelines for regular visual inspections.

CERUS Titan CI-075-P4 Specifications

General

Brand	CERUS
Model	Titan CI-075-P4
Category	DC Drives
Language	English