CERUS Titan CI-040-P2

Need help?

Do you have a question about the CERUS Titan CI-040-P2 and is the answer not in the manual?

Summary

SAFETY INSTRUCTIONS

PRECAUTIONS

1. Handling and installation

Careful handling and proper installation procedures for VFDs to prevent damage and ensure safe operation.

2. Wiring

Guidelines for correct input power, ground, and motor wiring connections to VFD terminals.

3. Start-up

Steps for initial VFD power-up, motor rotation check, and resonance frequency identification.

4. Operation

Procedures for VFD operation, including auto-restart, fault handling, and component protection.

5. Safety

Safety measures for VFD use, including emergency brakes and disabling auto-start functions.

6. Maintenance, inspection and parts replacement

7. Disposal

CHAPTER 7 - PID CONTROL WIRING AND BLOCK DIAGRAM

7.1 VFD Wiring for PID Control

7.2 PID Control Block Diagram

7.3 PID control Sleep mode with Sleep Pressure Boost function diagram.

7.4 PID control with Pipe Broken function diagram.

7.5 PID control with Pre-PID function diagram.

CHAPTER 8 - TROUBLESHOOTING & MAINTENANCE

8.1 Fault Display

Explanation of VFD fault codes displayed on the keypad and their associated protective functions.

8.2 Fault Remedy

Troubleshooting guide for identifying causes and solutions for various VFD faults.

8.3 Troubleshooting

Common operational issues and their checking and fixing procedures.

8.4 Checking VFD Power Components

Procedures for testing VFD power components like diodes and IGBTs using a multimeter.

8.5 Maintenance

Recommendations for routine VFD inspections and preventative maintenance.

CHAPTER 10 - MODBUS-RTU COMMUNICATION

10.3 Communication Parameters

10.4 Modbus-RTU Communication protocol

10.5 Parameter code list

CHAPTER 12 - CONFORMATION, STANDARDS AND WARRANTY

Warranty

Details on warranty periods for variable and constant torque applications, and conditions for service information.