Need help?Do you have a question about the Cerwin-Vega H71200.1D and is the answer not in the manual?
Introduction to Cerwin Vega Mobile amplifiers and their quality standards.
Covers general, mounting, and wiring precautions for safe installation.
Details electrical system checks and power wire connection steps.
Covers ground, remote turn-on, RCA, and speaker output connections.
Detailed explanation of amplifier controls, indicators, and connections.
Guidance on setting crossovers, input gain, and bass boost for optimal sound.
Illustrations of system wiring for different channel modes and setups.
Detailed technical specifications for all H7 series amplifier models.
Details on warranty coverage, terms, and the procedure for claims.
General| Power Output (RMS) | 1200W |
|---|---|
| Power Output (Peak) | 2400W |
| Dimensions | 13.9 x 7.7 x 2.1 inches |
| Amplifier Class | D |
| Number of Channels | 1 |
| Signal-to-Noise Ratio | >90dB |
| THD at 4 Ohms | <1% |
| Subsonic Filter | 15Hz - 40Hz |
| Bass Boost | 0 - 12dB |
| RMS Power at 2 Ohms | 800W |
| RMS Power at 4 Ohms | 500W |
| Input Sensitivity | 0.2V - 6V |
To Next Page
