EasyManuals Logo

Cerwin-Vega hed Series Quick Reference Guide

Cerwin-Vega hed Series
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SUBWOOFER CONNECTION
Wire the subwoofer terminal per the wiring diagram. Use minimum of 16 ga. wire
(14 gauge is preferable) between the enclosure terminal and the amplifier. When
wiring the subwoofer up to your system pay close attention to the polarity of the
terminals on the enclosure. Make certain they correspond to the polarity of the
subwoofer amplifier used
4
4
AMPLIFIER
250-500 WRMS
SUBWOOFER PLACEMENT
Placement is important as you need to develop “wavelength” to get the most bass output
from your NEW Cerwin Vega Mobile - loaded subwoofer enclosure. See drawing above.
NOTE: Make sure to secure the subwoofer enclosure as these woofers move a LOT of air and
the enclosure will bounce around under high output settings.
H6E10SV / H6E10DV
H6E12SV / H6E12DV
SUBWOOFER CONNECTIONS
ENCLOSURE TERMINAL
INSIDE
ENCLOSURE
ENCLOSURE MOUNTING BRACKETS
(mounting hardware included)

Other manuals for Cerwin-Vega hed Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cerwin-Vega hed Series and is the answer not in the manual?

Cerwin-Vega hed Series Specifications

General IconGeneral
BrandCerwin-Vega
Modelhed Series
CategoryAmplifier
LanguageEnglish

Related product manuals