Installation
4
Rear Deck Mounting
There are two primary methods for mounting speakers in the rear deck of a vehicle, top and bottom mounting. Top mounting
requires dropping the speakers in through the deck (interior) while bottom mounting secures the speakers from underneath
(trunk). Either method requires a good seal around the frame for the best performance.
Running New Wiring
In most cases when mounting new speakers you will use the factory supplied wiring, but if new wires have to be run there are
some precautions that need to be taken. If the wire needs to run through metal, such as a door jamb, always use a grommet
to prevent damage to your wires. Never run wire through bare metal! This can damage the source unit, amp, or even the
speakers themselves. Safety of the wiring against short circuits is THE MOST IMPORTANT INSTALLATION CONCERN.
To Next Page
Loading...
Need help?
General
