Cerwin-Vega CVE Series - User Manual

WALL/CEILING MOUNT
Instruction Manual (English)
FOR CVE-SERIES SPEAKERS

Summary

Important Safety Instructions

Introduction

Example Use

Supplied Parts and Hardware

Mounting Instructions

Step 1: Handle Removal

Remove speaker handles using a 4mm hex wrench for CVE-12/15, or the Cerwin-Vega plate for CVE-10.

Step 2: Attach Speaker Brackets

Secure Speaker Brackets (3) to the speaker using screws removed in Step 1.

Step 3: Assemble U-Channels

Assemble Upper and Lower U-Channels using screws (4), washers (5), and nuts (6).

Step 4: Mount U-Channels to Wall;Ceiling

Drill holes according to the pattern and mount U-channels using suitable screws/anchors.

Step 5: Secure Speaker to U-Channels

Install Thumbscrews (7) through the top and bottom Speaker Brackets to secure the speaker.

Step 6: Adjust Speaker Angle

Install a Thumbscrew (7) through each Speaker Bracket to secure the speaker at the desired angle.

Step 7: Attach Safety Cables

Attach safety cables to U-channels and Speaker Brackets for added security.

Warranty

How to Obtain Warranty Service

Cerwin-Vega CVE Series Specifications

General

Brand	Cerwin-Vega
Model	CVE Series
Category	Speakers
Language	English