Need help?Do you have a question about the Cerwin-Vega STROKER Series and is the answer not in the manual?
General| Type | Subwoofer |
|---|---|
| Series | STROKER |
| Impedance | 4 ohms |
| Mounting Depth | Varies by model |
| Mounting Diameter | Varies by model |
| Enclosure Recommendation | Sealed or ported |
| Driver Size | 12 inches |
Congratulations on your purchase of Cerwin Vega Mobile speakers; you've chosen quality for your car audio system.
Proper installation requires securely mounting the speaker to a baffle and sealing it to prevent air leaks for optimal performance.
Choose speaker locations in your vehicle that are equidistant from your ears to achieve the best possible sound results.
When mounting in doors, check window clearance, avoid cutting structural supports, and use sound deadening for improved sound.
Mount speakers in the rear deck using top or bottom methods, ensuring a good seal around the speaker frame.
Use grommets when running wires through metal to prevent damage and ensure safety against short circuits, a critical concern.
Adjust crossover settings for tweeter attenuation and phase to correct acoustical phase issues based on driver placement.
Mount tweeters using the provided kit, ensuring correct wiring and gently snapping the tweeter into its mounting cup.
Install crossovers in well-ventilated areas, behind door panels, protected from moisture and noise, connecting terminals correctly.
Detailed dimensions and mounting information for the SPRO65C speaker model.
Detailed dimensions and mounting information for the ST65C speaker model.
Power handling capabilities for ST65C (250W MAX/125W RMS) and SPRO65C (350W MAX/175W RMS).
Covers defects in materials and workmanship for one year for original purchasers from authorized dealers.
Initiate claims via authorized dealers, provide proof of purchase, and ship freight prepaid with an RA number.
Products purchased outside the USA are covered by the local distributor, not Cerwin Vega Mobile USA.
To Next Page