CF MOTO 300SR - Operating Your Vehicle; Break-in Period Requirements

87
OPERATING YOUR VEHICLE
Operating Your Vehicle
Break-in Period
The break-in period for this vehicle is the first 1000km� Maintain the vehicle according to the break-in
period requirements�
The following items should be observed during break-in period:
1� Do not run at high engine speeds immediately when the engien is just started� Allow the engine to warm
for 2 ~ 3 minutes at idle speed and let oil ow into all the engine lubricating parts.
2� Do not run the engine at high Rpm when the transmission is in neutral�
3� During the break-in period, CFMOTO suggests the top engine speeds as below:
Total odometer Top engine RPM
0 km ~ 500 km 4000 r/min
500 km ~ 1000 km 6000 r/min
DANGER
New tires are slippery which may lose control and cause damage� Tire pressures should be at the
specied value during the 1000km break-in period. Avoid sudden and maximum braking/acceleration and
hard cornering during the break-in period�