EasyManua.ls Logo

CF MOTO 300SR - Starting and Stopping Procedures

CF MOTO 300SR
161 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
90
OPERATING YOUR VEHICLE
Starting
Sit on the vehicle with side stand up�
Turn on the ignition switch�
Place the gear in Neutral�
Turn the stop switch to position “ ”�
Press the start button�
CAUTION
Engine running at high RPMs in cold temperatures negatively impacts the lifespan of engine� Always
warm the engine at a low speed�
Before the instrument self-inspection, do not start the vehicle with the start switch�
Pull the clutch lever and shift into a gear with side stand up, the vehicle can be started�
When the gear is in Neutral position with side stand up, the vehicle can be started�
If shifting into gear with the side stand down, the engine will turn o󰀨.
Do not press the start switch for more than ve (5) seconds. Please wait for more than 15 seconds to
press the start switch again, or it will cause the battery to discharge quickly�