EasyManua.ls Logo

CF MOTO CFORCE CF400AU - Pre-Ride Inspection; Starting the Engine

CF MOTO CFORCE CF400AU
189 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
77
OPERATION OF YOUR ATV
Pre-Ride Inspection
Before each use of the vehicle, a best practice is to complete the pre-ride inspection checklist.
WARNING
If a proper inspection is not done before each use, severe damage to the vehicle, severe injury, or death
could result. Always inspect the vehicle before each use to ensure it is in proper operating condition.
Starting the Engine
WARNING
Engine exhaust contains poisonous carbon monoxide and can cause loss of consciousness, resulting in
severe injury or death. Never run an engine in an enclosed area.
Starting a cold engine
1. Verify the gear selector is shifted to the Parking or Neutral position.
2. Apply the foot brake.
3. Turn the engine stop switch and main key switch to ā€œ ā€ (ON)
4. Verify the throttle is completely closed, then push the start switch on the left-hand control.
5. Once the engine starts, continue to warm the engine for a short period before operating the vehicle.

Table of Contents