87
OPERATION OF YOUR ATV
Driving procedure
1. Sit upright with both feet on the footrests and both hands on
the handlebars.
2. Start the engine and allow it to warm up. Apply the foot brake,
then shift the transmission into low gear.
3. Check your surroundings and determine your path of travel.
4. Release the brakes.
5. Slowly press the throttle with your right thumb and begin
driving. Vehicle speed is controlled by the amount of throttle
opening.
6. Drive slowly. Practice maneuvering while using the throttle and
brakes on a level surface.
To Next Page
Loading...
Need help?
General
