Need help?Do you have a question about the CFM CFM56-7B and is the answer not in the manual?
Explains the maintenance concept for CFM56 engines, focusing on condition monitoring rather than fixed overhaul schedules.
Covers inspection of SAC liners and dome area, including common defects and birdstrike/FOD analysis.
Details DAC inspection of liners, dome, and defects, including birdstrike/FOD procedures.
Describes HPT nozzle and shroud inspection using rigid and flexible probes.
Details inspection zones and common defects on HPC components and blades.
Defines specific inspection zones on HPT rotor blades and lists common defects.
Lists common defects found on LPT blades, to be assessed against AMM serviceability limits.
Explains the maintenance concept for CFM56 engines, focusing on condition monitoring rather than fixed overhaul schedules.
Covers inspection of SAC liners and dome area, including common defects and birdstrike/FOD analysis.
Details DAC inspection of liners, dome, and defects, including birdstrike/FOD procedures.
Describes HPT nozzle and shroud inspection using rigid and flexible probes.
Details inspection zones and common defects on HPC components and blades.
Defines specific inspection zones on HPT rotor blades and lists common defects.
Lists common defects found on LPT blades, to be assessed against AMM serviceability limits.
To Next Page
General