9 Cleaning
9.1 Cleaning the surface
The front panels are washable. We recommend using a sponge or cloth soaked in a mild detergent.
9.2 Cleaning the interior
After opening the device, you can, if necessary, carefully blow out the interior with a compressed
air gun.
9.3 Cleaning the control panel
Clean with warm or hot water (if necessary, add a slightly acidic, neutral or slightly alkaline cleaning
agent). Do not use abrasive cleaners or a high-pressure cleaner. Only limited resistance to organic
solvents (e.g. alcohol, benzine, etc.).
CAUTION
Make absolutely sure that no water enters the device while cleaning.
Before cleaning the device, disconnect it from the power mains!
To Next Page
Loading...
