5. To edit the program, press “
” or “ ” to move the cursor. The Time and temperature mode
indicators change accordingly. Then, the black dot start flashing, meanwhile there is a digit
displays the hour of being program.
6. Press COMF/ECON to toggle the temperature mode between Comfort and Econ. The
Temperature mode indicator changes accordingly.
7. Below example shows Program 4 is assigned to Tuesday. The cursor is moved to 18:00 and at
18:00 the temperature mode is Comfort
(a) Represents the hour of being program
(b) is flashing
8. For day group, program data display will be cleared if the program of the days is not the same.
9. This example shows the day group of “MON – FRI”. Programs of these 5 days are not the
same and the program data display are all cleared .In this display the “
”, “ ” and
COMF/ECON keys do not response. If PROG is pressed then it will initialize the program of
all the days of the group into default (Program 1).
At any time press OK or wait 15 seconds will return to Normal mode.
Note: where the black dot means the selected hour is set to comfortable mode, else economic
mode is selected.
All 9 programs are predefined programs and they are user changeable, the default program
profiles shown as below.
12
To Next Page
Loading...
