CHAINTECH 6AJA4 - Page 54

50
User's Manual
!!
!!
! Backup System
Smart Backup
1. Upon system boot up, the HDD Instant Recovery Utility will be shown on
the screen. Selet Backup System by pressing Alt+F1 key.
2. Select your hard drive to backup.
3. Wait for the backup process to finish and the system will automatically reboot.
Equivalent Backup
Still under evaluation testing for future Windows 2000/NT supports.
!!
!!
! Disk Information
1. Upon system boot up, the HDD Instant Recovery Utility will be shown on
the screen. Select Disk Information by pressing Alt+F2 key to view Disk Info.
!!
!!
! Hard Disk Copy
1. Upon system boot up, the HDD Instant Recovery Utility will be shown on
the screen. Selet Hard Disk Copy by pressing Alt+F4 key.
2. Select which hard drive to backup.(Copy 1 to 2 or 2 to 1 or 1 to 2 3 4)
3. Wait for the hard disk copy process to finish and the system will auto reboot.
!!
!!
! Restore System
1. Upon system boot up, the HDD Instant Recovery Utility will be shown on
the screen. Selet Restore System by pressing Alt+F3 key.
2. You will be prompt to confirmed restore drive. Type Y and press Enter key.
3. Wait for the backup process to finish and the system will automatically reboot.
!!
!!
! Uninstall
1. Upon system boot up, the HDD Instant Recovery Utility will be shown on
the screen. Seletc uninstall by pressing Alt+F5 key.
2. You will be prompt to confirmed uninstall. Type Y and press Enter key.
3. Wait for the uninstalling process to finish and press any key to reboot
This function does not support Multi-Booting management utility like
System Commander, etc.
Alway uninstall this function before you format or partition the hard disk
for other usage.
"