Need help?Do you have a question about the Chainway UR4 and is the answer not in the manual?
Chainway UR4 is a high-performance four-channel fixed UHF reader using Impinj R2000 module. Suitable for various indoor/outdoor environments and industries.
UR4 uses DC 12V/5A power supply, supports various antennas (6dBi, 9dBi, 12dBi), and has SMA female, RS232, RJ45 interfaces. Windows SDK and demo are provided.
Lists the components included with the UR4 reader: reader, antennas, feeder lines, cables, and demo software with executable files.
Explains how to connect the UR4 reader via serial port or Ethernet, detailing IP address, port, and network setup for multiple devices.
Details the UR4's GPIO interface, specifying pin definitions for relay outputs and optically coupled inputs with LED indicators.
Provides visual representations of the UR4 reader from different angles, highlighting its physical design and connectivity ports.
Guides the user through connecting the UR4 reader via serial port or network using the UHFAPP.exe software for parameter configuration.
Explains how to read tag EPC data using the 'ReadEPC' page, including filtering options for specific tags based on data.
Details how to read and write data to tag memory banks (RESERVED, EPC, USER) using the 'ReadWriteTag' page.
Explains how to use the 'Kill-Lock' function to lock, kill, permanently open, or permanently lock UHF tags, requiring passwords.
Describes how to receive UHF tag data in 'auto mode' using the 'UDP-ReceiveEPC' page, specifying PC IP address for data reception.
Provides information on reading hardware/firmware versions via 'UHF information' and current temperature via 'Temperature'.
To Next Page
General