Challenge XSS40E - Operating the Lawnmower; Step 1: Setting Cutting Height; Step 2: Starting the Engine

9
Customer Helpline 01904 727503
www.gardenservicecentre.co.uk
Step 1 - Setting the Cutting Height
Operating the Lawnmower
Step 2 - Starting the Engine
WARNING!
- Do not operate the machine in enclosed or poorly ventilated areas as the exhaust gas contains
toxic substances. Keep hands, feet, hair and clothing away from all the moving parts of the
machine. The exhaust and other parts of the machine will become hot during use. Make sure that
the blade is securely fastened before starting the engine.
PRIMER BULB 3~5
TIMES
STOP/START-LEVER
CLOSED
PULL STARTING
HANDLE
step 1 step2 step 3
Starting procedure quick guide
To start the engine, make sure that the spark plug cap is located on the plug and the machine is
lled with sufcient oil and petrol.
WARNING!
- The blade can cause serious injury. Before adjusting the mower height, stop the engine and wait
for the mower blade to stop completely.
1 Pull the lever towards the wheel, then move it forward or backward to adjust the cutting height.
2 Move it to any one of the 5 positions for the desired cutting height.
3 Return lever into securing plate.
NOTE! Never use the lowest cutting height for the rst cut of the season or in drought conditions.
Only about one thirds of the grass height should be cut.