Challenger AP11LED

AP11LCD / AP11LED Manager Guide
AP11LED/LCD-Manager- Rev 02
1
Manager Guide
This User Guide tells you how to operate your intruder alarm system. To simplify this User
Guide we have assumed that the alarm system has been installed by a professional intruder alarm
system installer (the installer), and that the system is operating in a “typical” way. Aspects of
your system that are not “typical” will be described by your installer.
NOTE: If you have any questions about your intruder alarm system, then consult your installer,
see contact details at the front of this User Guide.
Indications on the system
Indications
LED steady on indication
LED flashing indication
LED off
Internal Sound
External Device: Strobe
External Siren: Bell
Using System
After you have finish system settings, you can use the system now. This section gives an
operation instructions how to set and unset the system as well as how to reset after an alarm.

Challenger AP11LED Specifications

General

IP Rating	IP65
Voltage	12-24V DC/AC
Sound level	105 dB @ 1 meter
Intensity	500 cd
Dimensions	100mm x 75mm x 50mm
Weight	150g

Summary

Indications on the system

Using System

LED Keypad Operations

Setting and Unsetting the System

Instructions for setting, omitting zones, and unsetting the intruder alarm system using the LED keypad.

Alarm and Panic Functions

Guide to unsetting from alarms, resetting the system, and activating panic alarms via the LED keypad.

System Configuration and Manager Mode

Accessing Manager Program Mode

Steps to access the system's main menu structure via the Manager Program Mode.

User and Event Management

Details on user codes, event logs, and clearing alarms.

System Settings and Testing

Procedures for authorizing engineer access, setting time/date, chime zones, and system tests.

LCD Keypad Operations

Setting and Unsetting the System

Instructions for setting, omitting zones, and unsetting the intruder alarm system using the LCD keypad.

System Configuration and Manager Mode

Overview of setup menus, manager mode access, and panic alarm functions for the LCD keypad.