4283035M2 1
ISEKI THREE-CYLINDER DIESEL ENGINE
ISEKI THREE-CYLINDER DIESEL ENGINE
INTRODUCTION
General Information
This manual has been prepared to provide information
concerning the servicing and overhaul of the following
ISEKI engines, assuming that trained mechanics perform
this work at workshops outfitted with the required
equipment.
E3CD and E3CF engines are basically the same from
one another except for the piston sizes. But tractor
versions have different exterior views from each other.
The E3112 engine is also basically the same except for
the piston sizes and components of the fuel injection
systems.
This manual does not apply to field work where adequate
service tools and equipment are not available. The
contents of this manual cover all of the necessary
information which would be required for operations in a
workshop. These include construction, the functions of
major components, specifications, disassembly and
reassemble instructions, inspection and adjustment
instructions, troubleshooting, etc. Figures mentioned in
this manual are standard values established by ISEKI for
the E3C and E3100 series. Consequently, when a
non-ISEKI part has been installed on the engine or
Tractor / Engine Cross Reference
GC2300 / GC2310 / GC2400 /
ST22A *
E3112-VB19
(282)
1523 / ST24A / MT225B E3112-VB21
(306)
1423 / ST25 / MT225 ** E3112-B11
(244)
1528 / ST28A / MT255B E3CF-WB01
(294)
1531 / ST33A E3CD-WB20
(293)
1533 / ST34A / MT265B E3CD-WB13
(313)
1540 / ST41A / MT275B E3CD-WTB01
(314)
ZT29 E3CF-VG
(326)
ZT33 E3CD-VG02
(325)
GC2600 E3112-XB
(371)
GC1715 E3112-XB
(440)
GC1705 E3112-XB01
(441)
To Next Page
Loading...
Need help?
General
