ISEKI THREE-CYLINDER DIESEL ENGINE
2 4283035M2
adjustments and repairs have been made in a manner
other than as specified in this manual, the values
mentioned herein are inapplicable and useless.
Consequently, ISEKI does not assume responsibility for
any problems or damage caused by a value deviation due
to maladjustment or by the use of unauthorized parts.
Be sure to follow the instructions mentioned in this
manual when servicing the engines in a workshop. Values
necessary for servicing the engines are mentioned in
each instruction section, besides which all of the service
reference values are summarized in the SERVICE
STANDARDS TABLE. Please refer to this table before
commencing service work to assure efficient
maintenance and operation. Prompt and reliable servicing
is a critical factor in following the operating Procedures
and precautions included in this manual, while keeping
safety in mind at all times. The ultimate objective of this
manual is to provide you with adequate information to
service the engines most effectively and economically,
and in the end to gain a favorable reputation for ISEKI
products among its users.
NOTE: All information, illustrations, and specifications
contained in this technical manual are based on
the latest information available at the time of
publication. The right is reserved to make
changes at any time without notice.
NOTE: *For engine service information on models prior
to tractor serial number JNA25201, please use
engine manual 1449395M3.
NOTE: **For engine service information on models prior
to tractor serial number NM3601, please use
engine manual 1449395M3.
To Next Page
Loading...
Need help?
General
